We have applied the first coat of two part epoxy primer thinned twenty five percent as recommended by the manufacturer. We started at the bow and continued aft stopping at the cockpit. We still have a little more work to do in the cockpit area before its ready to prime. We left it overnight to cure and today will sand it with 3M 220 grit production paper and fill and fair any imperfections we find.
Posts
2 comments:
Hi, excellent work! here is our Alberg 30 site: http://svheron.weebly.com/
I really look forward to your posts, someday I will probably be doing a lot of this work as well.
Thanks again!
Chris
Thanks Chris,
Cheers, Don
Post a Comment