Galley bulkhead / Starboard Settee

Using Template material I made a mock-up of the galley bulkhead and using 1/4" plywood made a template of the front of the starboard settee. When I was satisfied with the template I drew it out onto 1/4" teak and cut it too shape. Several 4-1/2" holes were cut in the back piece to lighten it and the two pieces were laminated together. After another test fit and trimming as required I applied several coats of satin Wipe on Poly made by Minwax.

Laminating the pieces together

Test fitting

Back of the piece

Applying Wipe on Poly